DV Development Group DV4mini Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DV Development Group DV4mini. DV Development Group DV4mini 12 pagina's. D-star/dmr-hotspot-usb-stick
Pagina afdrukkenDV4mini
User Guide 2015
Generally nothing bad should happen because if any error occurs the boot loader
will be protected. Even with a power outage or interruption of the USB interface
one can just repeat the update.
The frmware update does not work in the remote mode and must be
accomplished locally.
Should the boot loader nor start (no colored blinking LEDs) you have to open the
housing and bridge two contacts. See picture below.
You connect the red marked points for example with tweezers while inserting the
stick into a USB interface. The boot loader starts now with LEDs in color. Now you
can start the user interface dv4mini and utilizing the Expert setup load the new
frmware by clicking on "Flash Firmware".
Remote Control:
One can control the DV4mini additionally from another computer.
Computer 1:
This is where the DV4mini USB stick is plugged in. One starts the program
"dv_serial" in console mode.
Computer 2:
Here you start dv4mini.exe - the user surface. In order to fne computer 1 is IP
address needs to be entered in the feld "distant DV4mini IP/URL" and you activate
Remote Control on/of.
Now one can control with computer 2 computer 1. You will get all displays and full
control over all set up as if you are sitting in front of computer 1.
- 11 -