DV8 FBBR-02 Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} DV8 FBBR-02. DV8 FBBR-02 12 pagina's. Front bumper 2021 ford bronco

INSTALLATION

MANUAL

STEP

INSTALLATION OF DV8 BUMPER

Begin by unpacking all items and

inspecting for missing pieces or

damage. If you have any concerns,

please contact the company the

product was purchased from.

Hardware Included:

(6) M12x50mm Bolts

(4) M6x20mm Bolts

(6) M12 Split Washers

(4) M6 Lock Nuts

(12) M12 Flat Washers

(8) M6 Flat Washers

STEP

Place the bumper face down on a soft

surface to prevent any damage to the

coating.

STEP

If vehicle is equipped with factory

sensors, lay out the harness over the

bumper and begin to feed the harness

into the bumper cavities so that the

sensors lay near their corresponding

holes.

Note: The large plug on the harness needs

to be on the driver side of the bumper.

Note: If your vehicle is not equipped with

sensors, use provided sensor plugs and

skip to step 6.

855-680-9595

NEED HELP?