DV8 OFFROAD FS-15 Series Installatiehandleiding
Blader online of download pdf Installatiehandleiding voor {categorie_naam} DV8 OFFROAD FS-15 Series. DV8 OFFROAD FS-15 Series 16 pagina's. Rear bumper 20+ jeep gladiator jt
Pagina afdrukkenFS-15 SERIES REAR BUMPER
20+ JEEP GLADIATOR JT
RBGL-11
TOOLS
REQUIRED
- T-50 Torque head socket
- #4, #6 Allen head sockets
- 10mm, 15mm, 16mm, 18mm Socket
- 8mm, 10mm, 17mm wrenches
- Snips/Scissors
- File
- Trim Clip Tool
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit —
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
SKILL
LEVEL
- Novice/Intermediate
- 2 persons
Little skill level required, however,
assistance is required for removal
and installation of bumpers.
Read and understand all
PRODUCT
INSTALLATION
TIME
- 3.5 Hour
Time to install this should only
take about three and a half
hours.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
NEED HELP?
MANUAL
REQUIRED
855-680-9595