Datasheen D326S Snelle installatiehandleiding - Pagina 5

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Datasheen D326S. Datasheen D326S 5 pagina's.

Rack-mount Installation

Rack Mounting D326S Switch in the 19-inch rack:

1. Disconnect all cables from the switch before continuing.

2. Place the unit the right way up on a hard, flat surface with the

front facing toward you.

3. Locate a mounting bracket over the mounting holes on one side

of the unit.

4. Insert the screws and fully tighten with a suitable screwdriver.

5. Repeat the two previous steps for the other side of the unit.

6. Insert the unit into the 19" rack and secure with suitable screws

(not provided).

7. Reconnect all cables.

Access the Web-based UI

To manage the switch through in-band access, you should configure

the management station with an IP address and subnet mask

compatible with your switch. For example, the default IP of switch is

192.168.1.1, your must set up your IP value in 192.168.1.2~253 and

subnet in 255.255.255.0.

1. Running your Web Browser and enter the IP address "192.168.1.1"

as the URL in the "address" field.

2. Key in the User name and password to pass the authentication.

The factory default value of User Name and Password is

"admin". After authentication procedure, the home page shows

up.

Now, you can start to manage D326S Switch. For any advanced

configurations setup such as VLAN and QoS, please refer to the

Manual within the CD-ROM.