DV8 OFFROAD MTO Series Installatiehandleiding - Pagina 5
Blader online of download pdf Installatiehandleiding voor {categorie_naam} DV8 OFFROAD MTO Series. DV8 OFFROAD MTO Series 13 pagina's. 2021 ford f-150 front bumper winch & non winch
Pagina afdrukken
INSTALLATION
MANUAL
STEP
8
If your bumper is equipped from the
factory with front parking sensors,
begin by removing the automatic air
dampening system on the factory
bumper using a 13mm socket on the
three bolts located on each side.
STEP
9
Unplug the connector on each side of
the air dampening system and set off
to the side.
STEP
10
Using a T30 torx bit, remove the
four bolts holding fog light housing
on each side of the factory bumper.
Unplug the fog lights and set off to
the side.
NOTE: The bumper wire harness has a
mount on the fog light. Using your push
pin removal tool, remove the harness
from each light.
855-680-9595
NEED HELP?