DV8 OFFROAD Razor Series Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} DV8 OFFROAD Razor Series. DV8 OFFROAD Razor Series 14 pagina's. Razorback hardtop 2018+ jeep wrangler jl

Pagina afdrukken

INSTALLATION

MANUAL

STEP 16 |

Check the seal between

the hardtop and the targa.

The seal should be snug, but not crushed,

and there should bo no visible gaps.

If the seal is crushed, but the targa

shifted away from the windshield, the

hardtop likely does not need adjustment,

and the targa needs to be re-fitted. Repeat

steps 11-16.

If the seal is crushed, but the targa fits

well on the windshield seal, the hardtop

may need to be adjusted backwards,

towards the rear of the vehicle. Loosen

hardtop hardware, adjust, then repeat

steps 11-16.

If there is a gap, then the hardtop needs

to be adjusted forward.

Loosen the factory hardware, adjust, then

repeat steps 11-16.

Do not worry at this time if the targa and

hardtop are not sitting level. There is

some slight adjustment here which will

be completed in a later step. Additionally,

it will be necessary to allow the hardtop

and targa to "set" over 2-3 weeks to allow

the seals to settle into position(this is

common with new seals).

Crushed Seal

Too Large of a Gap

Good Fitment

NEED HELP?

855-680-9595