Agri-Fab 45-0187 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Agri-Fab 45-0187. Agri-Fab 45-0187 12 pagina's. Agri-fab broadcast spreader 160 owners manual
Ook voor Agri-Fab 45-0187: Gebruikershandleiding (12 pagina's)
Pagina afdrukken
9. Place wheel assembly without hole through hub
(air valve to the outside) onto axle end having the
smallest and secure with 1-5/8" dia. flat washer
and 1/8" x 1-1/2" cotter pin. See figure 6. Use
extra 1-5/8" diameter flat washer if needed to take
up play.
COTTER
PIN
FIGURE 6
10. Place the drive wheel onto the axle (air valve to
the outside) and secure with 1/4" 1-3/4" hex bolt
and 1/4" hex lock nut. See figure 7.
1/4" x 1-3/4" HEX BOLT
AIR VALVE
1/4" HEX LOCK NUT
FIGURE 7
AXLE
1-5/8" DIA.
FLAT WASHER
AIR
VALVE
DRIVE WHEEL
11. Turn the broadcast spreader over so that it rests
on its wheels.
12. Assemble the hitch bracket to the hitch tube. See
figure 8. Secure with two 3/8" x 1-1/4" hex bolts,
3/8" lock washers and 3/8" lock nuts. See figure
8.
3/8" x 1-1/4" HEX BOLT
HITCH BRACKET
FIGURE 8
13. Assemble the flow control link (the end with the
smallest hole) to the flow control arm using one
1/4" x 5/8" hex bolt and one 1/4" hex lock nut. See
figure 9. DO NOT OVER TIGHTEN, FLOW CON-
TROL LINK MUST PIVOT FREELY.
14. Place the vinyl grip on the flow control arm. See
figure 9.
VINYL GRIP
FLOW
CONTROL
LINK
1/4" HEX
LOCK
NUT
SMALLEST HOLE
FIGURE 9
HITCH TUBE
3/8" LOCK WASHERS
3/8" HEX LOCK NUTS
FLOW
CONTROL
ARM
1/4" x 5/8"
HEX BOLT