DataTale Crystal USB 3.0 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DataTale Crystal USB 3.0. DataTale Crystal USB 3.0 15 pagina's.

Once the Housing Case is removed, the PCBA board (Printed Circuit Board)

and two (2) HDD Holders should be already securely installed onto the

Bottom Base. See Inside View for reference. Also, find the two (2) HDD

Screws included inside the package.

3. Then, place the 3.5-inch SATA hard drive into the two (2) HDD Holder slot

on top of the Bottom Case. Make sure the hard drive and PCBA are

aligned properly. Use a Philips Screw Driver and screw in one (1) HDD

Screws on each side of the HDD Holder. Tighten the HDD Screws

securely to ensure that proper alignment is maintained.

4. Once completed, replace the Housing Case back onto the Bottom Base

and push downward. Use a Philips Screw Driver and re-screw the four (4)

Housing Screws back onto the Bottom Base.

5. Now, the Enclosure Unit is ready for connection to a computer!