4next EasyLog Snel aan de slag - Pagina 2

Blader online of download pdf Snel aan de slag voor {categorie_naam} 4next EasyLog. 4next EasyLog 2 pagina's.

Pagina afdrukken
In Fig.5, the IP address of the PC is 192.168.1.5. It belongs to the same class / network as EasyLog, since the firsts
3 numbers (192, 168 and 1) are the same. It is therefore possible to reach EasyLog from the PC browser.
If the network is NOT in the 192.168.1 class, you can proceed in 2 ways:
1. Set up EasyLog to work in DHCP (see paragraph 4.2);
2. Set a valid IP on EasyLog (see chapter 5 EasyLog manual available on the
website www.4next.eu)
2.2 DHCP settings
To set up DHCP set DIP SWITCH in the following way:
1 =ON
2 =OFF
Possible configuration set up:
DIP-SWITCH 1
DIP-SWITCH 2
OFF
OFF
ON
OFF
OFF
ON
cable (Par. 4.3) and power it (Par. 4.4). When the Status LED flashes at regular intervals, EasyLog is ready for use.
At this point you can proceed in 2 ways:
a. by determining the IP address via a network discovery software (e.g. Advanced IP Scanner or Free IP Scanner). Then
enter the address found on the browser.
b. type in the browser http: //easylog.local. Thanks to the dDNS protocol, EasyLog will respond to the request allowing the
user to access the configuration pages without knowing the exact IP. This option it is available if the Bonjour service or
other dDNS service (generally present) is available on the PC from which it is accessed.
N.B. Use this option by connecting at most one EasyLog in the same LAN.
2.3 Login e autenticazione
Once the IP address has been defined, type it in the browser. This will allow you
to access the EasyLog configuration and consultation pages.
The first screen (Fig. 8) is the authentication page with username and password.
The default values are:
User name:
admin
Password:
admin
Further information, manuals and other documentation is available at our
web site
www.4next.eu
The following QR code gets you stright to Easylog manual and web page.
Easylog WEB page
Meaning
Use the previously saved configuration
Original configuration is 192.168.1.100
Activates DHCP and ignores saved configuration
Uses fixed IP 192.168.1.100 and ignores saved
configuration
Easylog manual
Connect EasyLog to the LAN via an Ethernet
Fig.8 Loging mask from PC browser
4neXt S.r.l.s.
Via L.da Vinci, 15
30030 Vigonovo VE - Italy
Tel. +39 049 098 1450
www.4next.eu
Quick start Rev.2.0 24/10/2020