DVB SRGL-09 Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} DVB SRGL-09. DVB SRGL-09 9 pagina's. 4-dr rock skins 21+ jeep jt gladiator

INSTALLATION

MANUAL

STEP 11 |

To use the nutsert tool,

slider the M6 washer and spacer onto

the provided M6x50 bolt with the washer

going on the bolt first.

Then install a nutsert onto the exposed

threads by hand.

STEP 12 |

Slide the nutsert tool with

the nutsert into the mounting hole.

Ensure the flange of the nutsert is flat

against the vehicle prior to tightening.

STEP 13 |

Use a 12mm wrench to hold

the spacer while tightening with a 10mm

socket. Tighten slowly until the nutsert is

set properly. Do not over tighten.

Nutsert should be "crushed" against the

inside of the trim so that it is tight and

secure. When finished remove the nutsert

tool using a 10mm socket and repeat as

needed.

NEED HELP?

855-680-9595