DVC BASLER ACE Snelle installatiehandleiding - Pagina 6

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} DVC BASLER ACE. DVC BASLER ACE 14 pagina's.

2.3 Installing the Hardware

If you are using a 12 VDC camera power supply:

Connect one end of a network cable to the network connector on the camera, and

connect the other end of the cable to the network connector on the GigE network adapter

in your PC.

Connect one end of the AC cord for the power supply to the power supply's body and the

other end to an AC wall outlet.

Connect the 6-pin connector on the output of the power supply to the 6-pin connector on

the camera.

Your camera will power up and will acquire an IP address from the PC (see the note

below).

Go on to Section 2.4

If you are using a GigE PoE power injector:

Connect one end of a network cable to the network connector on the power injector

labeled "Data In", and connect the other end of the cable to the network connector on the

GigE network adapter in your PC.

b. Connect one end of the AC cord for the power injector to the injector's body and the

other end to an AC wall outlet.

c. Connect one end of a network cable to the network connector on the power injector

labeled "PoE Out", and connect the other end of the cable to the network connector on

the camera.

d. Your camera will power up and will acquire an IP address from the PC (see the note

below).

Go on to Section 2.4.

Quick installation Guide V1

DVC