Frigicoll KAY-S 26 DR8 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Frigicoll KAY-S 26 DR8. Frigicoll KAY-S 26 DR8 20 pagina's.

NOTE ON LOUVER ANGLES

When using COOL or DRY mode, do not set louver

at too vertical an angle for long periods of time.

This can cause water to condense on the louver

blade, which will drop on your floor or furnishings.

(See Fig. A)

When using COOL or HEAT modes, setting the lou-

ver at too vertical an angle can reduce the perfor-

mance of the unit due to restricted air flow.

Do not move louver by hand. This will cause the

louver to become out of sync. If this occurs, turn

off the unit and unplug it for a few seconds, then

restart the unit. This will reset the louver.

• Sleep Operation

The SLEEP function is used to decrease energy use

while you sleep (and don't need the same temperature

settings to stay comfortable). This function can only be

activated via remote control.

Press the SLEEP button when you are ready to go to

sleep. When in COOL mode, the unit will increase the

temperature by 1°C (2°F) after 1 hour, and will increa-

se an additional 1°C (2°F) after another hour. When in

Note: The SLEEP function is not available in FAN or DRY mode.

Fig. B

HEAT mode, the unit will decrease the temperature by

1°C (2°F) after 1 hour, and will decrease an additional

1°C (2°F) after another hour.

It will hold the new temperature for 5 hours, and then the

unit will turn off automatically.

Page 11