Datavideo DAC-70 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Datavideo DAC-70. Datavideo DAC-70 18 pagina's. Up / down / cross converter
Ook voor Datavideo DAC-70: Snelstarthandleiding (17 pagina's), Gebruiksaanwijzing (20 pagina's)

Pagina afdrukken

How to update the DAC-70 firmware

From time to time Datavideo may release new firmware to either add new

features or to fix reported bugs in the current DAC-70 firmware. Customers

can update the DAC-70 firmware themselves or they can contact their local

dealer for assistance.

This section describes the firmware update process and it should take

approximately 10 minutes total time to complete.

The current DAC-70 settings should be noted. Once started the update

process should not be interrupted as this could result in a non-responsive unit.

As well as a working DAC-70 you will need:

1. The latest update file for the DAC-70. This can be obtained from

your local Datavideo dealer or office.

2. The Upload Firmware utility. This can also be obtained from your

local Datavideo dealer or office.

3. A Windows computer with USB 2.0 port.

4. A USB 2.0 - USB A to micro USB cable.

How to update the DAC-70

1.Switch off the power to the DAC-70.

2.Save the firmware update file and Upload Firmware utility to the

desktop of your Windows computer so they are easy to locate.

3. Connect the USB 2.0 cable between the DAC-70 and the

computer.

4. Launch the Datavideo Upload Firmware utility. It will show

Disconnected

5. Now switch on the power to the DAC-70. The connect button will

now be available to click. Once you clicked the Utility, it will now

show

Connected.

6. Click the Open File button and select the update file.

7. Click the Start button and wait for the progress bar to finish.

8. When finishing the utility it will confirm

updated successfully.

9. The utility will automatically disconnect the DAC-70 unit.

10. Remove the USB cable from the DAC-70 and power cycle of the

unit.

11. The DAC-70 is now ready for use again.

and the connect button will be greyed out.

PASS

if the unit has been

DAC-70