DVIGear DVI-7350a Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DVIGear DVI-7350a. DVIGear DVI-7350a 10 pagina's. Hdmi fiber optic extender

Pagina afdrukken
4.0

INSTALLATION

This product consists of a Transmitter (Tx) unit and a Receiver (Rx) unit. The Tx
unit must be connected to the HDMI output port of the signal source (such as a
DVD Player). The Rx unit should be connected to the HDMI input port of a digital
display.
The high-speed HDMI signal components are routed from the Tx unit to the Rx unit
using four (4) multi-mode optical fibers with LC connectors (see the picture below).
Each unit has four (4) optical ports which are marked with the nomenclature 1, 2,
3 and 4. Connect each strand of the fiber optic cable to the corresponding number
on both the Tx and Rx units. Both the Tx and Rx units have a single DDC port.
Use a standard CAT5 cable of the appropriate length to link these two ports. Take
care that the CAT5 cable is not routed near any source of RFI/EMI interference,
such as high current AC power lines and/or AC motors or industrial machinery, as
these items may induce noise into the DDC signal line that can adversely affect the
product's performance.
-4-