DVIGear DVI-7365 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DVIGear DVI-7365. DVIGear DVI-7365 18 pagina's. 4k hdmi fiber optic extender, 1x lc

Pagina afdrukken

5 .1

Learning an EDID

Set the EDID switch on the Transmitter to the desired EDID learning

mode (EDID Learn 1 or EDID Learn 2).

Connect the HDMI input on the Transmitter to the HDMI input port on

the display using a short, high quality cable.

First, supply power to the display. Next, supply power to the

Transmitter. The EDID LED on the front panel of the Transmitter

should light up blue. Now, press and hold the EDID button on the

front panel of the Transmitter for about 2 seconds and then release.

If the EDID has been successfully learned, the EDID LED will blink

once. The saved EDID file will be stored in non-volatile memory. If

the EDID learning process fails, then the EDID LED will flash 5 times.

In this case, repeat steps 1-4 above. Contact technical support if

further assistance is required.

Finally, disconnect the Transmitter from the display. Continue with

system setup as described in section 4.1.

-13-