Datavideo TLM-700HD Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Datavideo TLM-700HD. Datavideo TLM-700HD 20 pagina's. 7" hd/sd tft lcd monitor
Ook voor Datavideo TLM-700HD: Gebruiksaanwijzing (15 pagina's), Snelstarthandleiding (14 pagina's), Gebruikershandleiding (17 pagina's)

Pagina afdrukken



Keep pressing the MENU button to cycle through the main menu options.



Press the SOURCE button to exit the menu mode.

3.4 Setup (On Screen Display, Time Code)



Press the MENU button four times to display the Setup setting menu.

OSD Timer



Press the ENTER button to highlight the OSD Timer setting.

* N.B.: OSD Timer sets how long the setting menus will stay on screen.



Press the ENTER button again to display the OSD Timer setting position.



Press the UP or DOWN button to set the OSD value between 5 to 60 SEC.



Press ENTER button to save the OSD value.

OSD Blending



Press the UP or DOWN button to highlight the OSD Blending setting.

* N.B.: OSD Blending sets how transparent the setting menus will be on screen.



Press the ENTER button to display the OSD Blending setting position.



Press the UP or DOWN button to select the OSD blending value (from 0~7).

* N.B.: OSD Blending value 0 = Min transparency 7 = Max transparency



Press the ENTER button to save the OSD blending value.

Time Code



Press the UP or DOWN button to highlight the Time Code setting.



Press the ENTER button to toggle the on screen Time Code display ON / OFF.

TC Position



Press the UP or DOWN button to highlight the TC Position setting.

* N.B.: TC Position is used to set where on the monitor Time Code will be shown.



Press the ENTER button to cycle through the possible Time Code



Positions on the monitor (Left/Up, Middle/Down, Right/Down, Right/Up)

TC HD Line



Press the UP or DOWN button to highlight the TC HD Line setting.



Press ENTER button to cycle through the possible HD time code lines (8~20).

TC SD Line



Press the UP or DOWN button to highlight the TC SD Line setting.



Press ENTER button to cycle through the possible SD time code lines (10~21).

TC Font Size



Press the UP or DOWN button to highlight the TC Font Size setting.