DVIGear DVI-3580a Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} DVIGear DVI-3580a. DVIGear DVI-3580a 9 pagina's. 4k multiviewer switcher, scaler
Ook voor DVIGear DVI-3580a: Snelstarthandleiding (8 pagina's)

Pagina afdrukken

Front Panel Layout

1. IR Receiver Window

2. Input Buttons

3. Audio Source Button

4. Window Position Buttons

5. Screen Layout Buttons

6. Output Resolution Button

and LEDs

7. Power Indicator LED

8. Standby Button

Receives IR signals from the IR Remote Control.

Press buttons 1-7 to select the video or audio inputs. The indicators

show the status of the input selections.

Press this button and then press one of the input buttons (1-7) to select the

audio input. Use the Web GUI or RS-232 / IP commands for full control.

These buttons are used to assign video inputs to certain MultiViewer

window positions (see page 6).

Select from one of four different MultiViewer layouts:

Single, Double, Triple, Quadruple.

Press this button to cycle through and select the output resolution. The LED of

the selected resolution will light up. See pg. 8 for available output resolutions.

Lights when power is applied and the master power switch is ON.

Toggles the unit between standby and normal power modes. The green

indicator lights up when in standby mode.