Datavideo CCU-100J Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Datavideo CCU-100J. Datavideo CCU-100J 20 pagina's. Camera control unit

Product Overview

This CCU-100 kit is designed to easily connect several Datavideo products into an effective and professional

studio system. This guide assumes you may already own some or all of the other Datavideo products

mentioned in this document. Where an asterix symbol (*) is shown next to a model number, this product is

not supplied within the CCU-100 kit and an additional purchase may be required. Please speak with your

dealer to discuss your desired set up using the Datavideo equipment you may already have. For more

information on any of the products marked with an asterix (*) please visit our website www.datavideo.com

The CCU-100 kit can be used for passing on power to professional video cameras from the Datavideo PD-6*

power centre and handling signals sent over the camera cables (CB-43 / 44 / 45 / 49*) to a switcher. In this

way, it is used to remotely set up various camera parameters such as iris, shutter, gain, and master pedestal

using an MCU-200 (S/P/J)*.

As well as passing on camera control signals, the CCU-100 system simultaneously handles digital SDI and

analogue signals for camera video output, Program look back video, camera view finder data as well as tally

and intercom signals between the cameras and a video switcher.

The Datavideo AD-2 (S/P/J), Multi Transmission Adaptor Box, is an adaptor box that allows connections

between the CCU-100 Camera Control Unit and a single camera position. The CCU-100 and AD-2 (S/P/J)

form part of an integrated cabling solution that allows you to get things done fast, easy and within a budget.

1.1

• Control up to 4 cameras from one CCU-100 Camera Control Unit using the supplied AD-2 (S/P/J)

units.

• Remote control of camera functions including Iris, shutter, gain, master pedestal etc

• HD/SD SDI video transmission from digital camera

• Transmission of view finder / monitor video signals

• Return look back video signal for camera operator

• Two-way intercom with camera operators using an ITC-100*

• Datavideo switcher tally support

• DC Power supply from 4-PIN XLR sources such as PD-6 Power Center*

• RJ-45 Port providing connection to MCU 100 (S/P/J) / 200 (S/P/J)* for Remote Control

- 6 -