ADE PFA3000 Bedieningshandleiding - Pagina 10
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADE PFA3000. ADE PFA3000 15 pagina's. Electronic precision scale
Setting up the maximum weight
Start the presetting mode as described before.
Press the UNIT-button until correspondent menu appears.
Set the maximum value.
Press PCS-button to change the value from left to right.
The value you want to set is blinking.
Press „-0-"-button to increase the value by one.
Press „TARA"-button to decrease the value by one.
Press the UNIT-button to save the presetted value and change to the next step.
Setting for acoustical alarm for minimum / maximum weight
If a minimum and maximum weight has been entered an acoustical signal may be activated.
The sound will appear as long as the weighing good is below the minimum value and above the
maximum value.
Start the presetting mode as described before.
Press the UNIT-button until correspondent menu appears.
Press the PCS button, to activate or deactivate the alarm.
ON means Alarm is active, OFF means Alarm is not active.
Press the UNIT-button to save the presetted value and change
to the next step.
Auto shut off mode
Start the presetting mode as described before.
Press the UNIT-button until correspondent menu appears.
Press the button PCS to activate or deactivate the auto shut
off mode
ON means active, OFF means deactive function.
In case the auto shut off mode is activated the scale will
automatically shut off after 90 seconds.
To use the scale after auto shut off the scale has to been
turned on again.
Press the UNIT-button to save the presetted value and change to the next step.
Presetting of communication address
There are address no. 1-26 for setting available.
Presse ZERO to increase the number by one or press
TARE to decrease the number by one.
To confirm press PRN.
Press the UNIT-button to save the presetted value
and change to the next step.
9
PFA-200702-Rev004-UM-en