Datel WildFire EVO Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Datel WildFire EVO. Datel WildFire EVO 10 pagina's. Gamepad for xbox 360
Ook voor Datel WildFire EVO: Snelstarthandleiding (3 pagina's)

Pagina afdrukken
In order to assign Rapid Fire to the Start button and Back button without exiting the Rapid Fire
configuration screen. You need to press and hold the F1 or F2 button before pressing the Start
button and Back button.
When making your selections, as shown button icons are displayed by the Rapid Fire
configuration screen confirming the buttons which will be assigned Rapid Fire.
Having chosen the buttons which you would to assign Rapid Fire you can now save the
configuration by pressing the 'Start' button. Alternatively you can set the Rapid Fire speed as
detailed in the next section. If you would you like to continue without changing the Rapid Fire
speed, as detailed under section '11' you can now enable the feature with chosen buttons.

12.3.2. Setting Rapid Fire Speed

Having chosen the buttons which you would like to assign Rapid Fire, you can choose the speed
which Rapid Fire will operate. In order to set the speed of Rapid Fire you need to move the
Rapid Fire slider bar either to the left to decrease or to the right to increase. You can use any of
the buttons shown in the following illustration:
Use one of these controls
Left Analogue
Stick
Direction
Buttons
Once you are happy with the configuration save the configuration by pressing the 'Start'
button. As detailed under section '11' you can now enable the feature with chosen buttons and
set speed.
RAPID FIRE
A B
LB
LS
LT
ST A R T
x Y
RB
RS RT
B A CK
Right Analogue
Stick
12.4. Low Recoil
The Low Recoil feature allows you to set the level of rumble which you feel during gaming. The
rumble configuration screen allows you can adjust the level of rumble which you feel on either
handle of the pad as shown in the follow illustration:
12.4.1. Configuring Low Recoil
In order for you to configure the level of rumble which you feel on either handle of the pad.
You need to adjust the Left Handle Slider Bar and the Right Handle Slider Bar, when making
adjustments to either slider bar the actual level of rumble is felt though the handles. To do this,
please follow these steps:
Left Handle Slider Bar
Moving the Left Analogue stick left and right will adjust the Left Handle Slider Bar, as shown in
the following illustration:
Left Analogue
Stick