4qd Pro-120 Series Gebruiksaanwijzing

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 4qd Pro-120 Series. 4qd Pro-120 Series 16 pagina's.

Pagina afdrukken
Cambridgeshire, CB25 0AH
"We're in Control"
See us via the Internet:
Foreword
4QD try to write a manual which is readable. Please
read the manual through before starting installation.
To help you, we have marked the more technical
sections ¶ so that you may ignore them.
This manual covers installation and wiring of 4QD's
Pro series controller in the usual applications. There
are finer points of installation which are outside the
scope of such a printed manual and you should refer
to our www site for more information.
Models
The Pro-120 is available either for 24v operation or
for 12v operation. Models can also be supplied for
36v and 48v
The voltage is marked on the relays. Make sure this
are correct as 24v relays will not operate from 12v
and 12v relays will soon burn out if used on 24v.
The standard model is suitable for permanent magnet
or shunt wound motors.
Office
30 Reach Road
Burwell
Fax: 01638 744 080
http://www.4QD.co.uk
Instruction Manual
Pro-120 series controllers
Mark 2 series
Date printed: 30th April 2014
Stores
Unit 6A
Heath Road Industrial Estate
Burwell
Cambridgeshire, CB25 0AP
Applications
4QD's Pro range of 4 quadrant controllers are
well suited to general purpose speed control
applications where reversing is required. They
are used extensively by hobbyists and industry.
Amongst other applications our controllers have
been successfully used in the following:
Camera dollies
Caravan shifters
Carnival floats
Conveyors
Factory stores vehicles
Floor cleaning machines
Golf buggies
Invalid scooters
Kiddie cars
Miniature railways, 3", 5" and 7¼ gauge
Mobile targets
Mountain rescue vehicles
Remote controlled vehicles (Robots)
Ride on golf buggies
In fact wherever battery motor speed control is
required
"We're in Control"
Winches