Datel DMS-PS10-CM Brochure & specificaties - Pagina 2

Blader online of download pdf Brochure & specificaties voor {categorie_naam} Datel DMS-PS10-CM. Datel DMS-PS10-CM 8 pagina's. Dms-ps-cm series
Ook voor Datel DMS-PS10-CM: Gegevensblad (8 pagina's)

Pagina afdrukken
Performance/Functional Specifications
Typical at T
= +25°C and V
= 85-264V @47-63Hz
IN
A
AC Input
Input Voltage Range, All models ➀
Input Current (115V/230V, typ.):
5-Watt Models
10-Watt Models
16-Watt Models
Inrush Current (All models, typical peak):
@115Vac
@230Vac
Isolation (Min.):
Output V1 to AC Input
Outputs V2 & V3 to AC Input
AC Input to Frame Ground
Output V1 to Frame Ground
Outputs V2 & V3 to Frame Ground
Outputs V2 & V3 to Output V1
Output V2 to Output V3
Frame Ground Leakage Current (Max.):
@115Vac
@230Vac
Switching Frequency (Typical):
V1 (5W and 10W models)
V1 (16W models)
V2 & V3 (All models)
Line Fuse (Built-in)
IEC60127-2, sheet 3 specification
(slow-blow)
AC Mains Terminal Block (TB4):
Wire Size & Type
Insulation Strip Length
Screw Tightening Torque
Rated Voltage
250V (VDE 0110-V. Group 3)
EMI (All models)
Class B
Safety Approvals
DC Outputs
Line Regulation (All outputs)
Load Regulation: ➁
V1 (All models)
V2 & V3 (All models)
Output Accuracy (Max.):
V1 (All models)
V2 & V3 (All models)
Hold-Up Time (47-63Hz):
@115Vac
@230Vac
Noise & Ripple
(All models, 20MHz bandwidth):
V1
V2 & V3
Transient Response ➂
85-264V @47-63Hz
0.15A/0.07A
0.3A/0.13A
0.33A/0.16A
14.1A
32.5A
3000Vac
3000Vac + 1000Vdc
1500Vac
500Vac
500Vac + 1000Vdc
1000Vdc
2000Vdc
0.5mA
3.5mA
75kHz
83kHz
100kHz
1A/250Vac, 5 x 20mm, meeting
for time lag fuses
2
14-20AWG (2.5 to 0.5mm
),
solid or stranded
0.25 inches (6.4mm)
4.4 pound-inches (0.5Nm)
630V (VDE 0110-V. Group 2);
Meets CISPR Pub. 22 & FCC
Pending
±0.1% (max)
±2%
±0.2% (max)
±2.0%
±2.5%
20mSec. typ.
80mSec. typ.
See Noise & Ripple graphs
40mVp-pk (typ.)
8mVp-pk (typ.)
See Transient Response graphs
www.murata-ps.com
DMS-PS-CM Series
High Efficiency, AC/DC Instrumentation Power
Supplies with Individually Isolated Outputs
DC Outputs (continued)
Efficiency (Typ.@ 120Vac, full load):
Single Output Models
Dual Output Models
Triple Output Models
DC-Output Terminal Blocks (TB1, TB2, TB3):
Wire Size &Type
Insulation Strip Length
Screw Tightening Torque
Short Circuit Protection (All outputs)
Overvoltage Protection V1 (max.)
Environmental
Operating Temperature
–25 to +70°C @ 50% rated power
Storage Temperature
Cooling
Notes)
Humidity (Non-condensing)
Physical
Dimensions
Weight:
5 Watt Models
10 Watt Models
16 Watt Models
Case Materials:
Outer Case
DC/DC Modules
AC/DC Modules
➀ All models will also operate from a regulated and filtered 110 to 340Vdc input.
➁ Unless otherwise specified, load regulation is measured with the output under
test undergoing a load change of 100% to 50% at nominal line input and,
when applicable, with all other outputs operating at 50% of rated load.
➂ Transient response is defined as the output returning to within its specified
tolerance in 10ms or less, following a 90% load change.
Technical enquiries email: [email protected], tel:
75%
73%
71%
2
16-20AWG (1.5 to 0.5mm
),
solid or stranded
0.25 inches (6.4mm)
3.6 pound-inches (0.4Nm)
Foldback, self-recovering
134% x Vout
0 to +50°C @ full rated power;
(see Figure 3)
–40 to +85°C
Free air convection with derating
(see Figure 3 and Technical
0 to 85%
See Mechanical Specifications
5.8 ounces (165 grams)
6.9 ounces (195 grams)
7.9 ounces (223 grams)
ABS, UL94 5VA
Phenolic, UL94 V-0
Plastic, UL94 V-1
+1 508 339 3000
MPM_DMS-PS-CM_B01 Page 2 of 8