Agri-Fab 45-0358 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Agri-Fab 45-0358. Agri-Fab 45-0358 8 pagina's. Box scraper attachment
Ook voor Agri-Fab 45-0358: Gebruikershandleiding (8 pagina's)

Pagina afdrukken
4.
.
.
Remove
the pivot pin and the slotted
hex nut from
the mast assembly
as shown
in figure
4. Attach
the weight
tray to the end of the mast assembly
using a 3/8" x 1" hex bolt and a 3/8" Nylock
hex
nut. Tighten
nut and bolt.
Reinstall
the slotted
hex nut onto the threaded
stud. Tighten
the slotted
nut, aligning
a slot with
the drilled hole in the stud. Reinstall
the cotter pin
through
the hole in the stud. See figure 4.
Reinstall
the pivot pin and secure
the it with the
haircotter
pin. See figure 4.
1 .
2.
Before
starting,
make
sure
the
material
to be
moved or conditioned
is dry enough by squeezing
some in your hand.
If it forms a ball that doesn't
crumble,
the material
may be too wet to work.
The box scraper
scarifiers
can be set to penetrate
the ground to depths of 1/2" to 3-1/2" in 1" incre-
ments. To change the depth, remove the clevis pin
that attaches each scarifier
tooth to the box scraper
and relocate
the pin in another
hole of the tooth.
Be sure to use the same
hole in each
scarifier
tooth.
See figure 5.
WEIGHT
COTTER PIN
TRAY
PIVOT
PIN
_/
_
I
Il 4_
U
3/8"
x 1"
I _]'_...._'__.1
REX BOLT
SLOTTED
__
_/
HEX NUT
I
FIGURE4
ADJUST
DIGGING
DEPTH OF SCARIFIER
TOOTH
BY RELOCATING
CLEVIS
PIN IN ANOTHER
HOLE
OPERATION
FIGURE 5
The box scraper is an attachment
used with the grader
blade. The box scraper breaks up, levels, finish grades,
and scarifies
the ground
for soil preparation.
IMPORTANT:
Do not swivel
the grader
blade.
The
grader blade must remain locked in the straight
ahead
position
when the box scraper
attachment
is used.
.
Any time the box scraper
is to be stored on a hard
surface,
raise each scarifier
tooth by relocating
the clevis
pins to the bottom
hole in each tooth
before
lowering
the scraper.
MAINTENANCE
_
CAUTION:USECAREWHENWORKING
AROUND
A RAISED
BOX SCRAPER.
KEEP YOUR FEET AND HANDS
FROM
UNDER
THE
BOX SCRAPER
AT ALL
TIMES. SERIOUS
INJURY CAN RESULT
SHOULD
THE
BOX SCRAPER
DROP
UNEXPECTEDLY.
1.
Check for and tighten any loose hardware
before
each use.
2.
Clean
the box scraper
and lightly
oil only bare
metal after each use.
3.
Remove
all dirt and rust. Touch
up paint before
placing
box scraper
in storage.
4.
Store box scraper
inside a dry area.