AUSTRALIAN MADE GREAT MATE Installatie- en installatie-instructies - Pagina 14

Blader online of download pdf Installatie- en installatie-instructies voor {categorie_naam} AUSTRALIAN MADE GREAT MATE. AUSTRALIAN MADE GREAT MATE 20 pagina's. Double swing gate motor kit

Pagina afdrukken

GATE MOTOR

INSTALLATION AND SET UP

INSTRUCTIONS

WARNING

Care should be taken around the moving gate and any moving components to avoid

damage or personal injury.

Setting the Safety Obstruction Sensing / Auto Reverse Adjustment

Refer to the "DC2 Circuit Board" data sheet included with this manual and locate the Motor

Force trim pot on the circuit board

This adjustment controls the motor torque and obstruction sensing of the gate motor. The motor

needs to have enough torque (force) to fully open and close the gate. Maximum motor torque

disables the safety obstruction sensing and can damage the gate and gate motor.

Turn the Motor Force trim pot anti-clockwise to reduce the motor torque (increase sensitivity to

an obstruction) or turn the Motor Force trim pot clockwise to increase the motor torque

(decrease sensitivity to an obstruction).

Once the gate motor is operating, the Motor Force needs to be set to ensure the gate motor

responds if the gate is obstructed. When the gate is opening, use an obstruction to stop the

gate and the gate motor should click off and stop the gate. When the gate is closing use an

obstruction to stop the gate and the gate motor should click off and then the gate should re-

open. Adjust the Motor Force trim pot accordingly.

Motor Force Trim Pot

WARNING

Care should be taken around the moving gate and any moving components

to avoid damage or personal injury.