AUSTRALIAN MADE GREAT MATE Installatie- en installatie-instructies - Pagina 3

Blader online of download pdf Installatie- en installatie-instructies voor {categorie_naam} AUSTRALIAN MADE GREAT MATE. AUSTRALIAN MADE GREAT MATE 20 pagina's. Double swing gate motor kit

Pagina afdrukken

Read all instructions and data sheets before installing the gate motor kit. Failure to follow the instructions

could void warranty.

Ensure the gate is in good condition, opens and closes freely for its full length of travel and it does not hit

or bind on the driveway or garden beds. Remove any wheels that are fitted to the gate.

Ensure the gate is correctly and securely mounted to the post which is firm in the ground.

Generally, the gate motor requires about 400mm to 500mmside clearance from the gate hinge to allow

the arms to rotate around during the opening of the gate.

We recommend 1.5mm twin active lighting cable for power supply wiring and 1mm figure 8 wire for wiring

push buttons and other auxiliary items.

Place the gate motors on a suitable work bench. Unpack the motors and remove the metal motor cover.

Visually inspect the motor to ensure nothing has moved during transit. Refer to the "DC 2 Circuit Board"

data sheet included with this manual and familiarise yourself with the layout and location of the items and

wiring terminals.

Motor

Cover

Drive

Arm

Solar Regulator

(Solar Powered

Kits Only)

Circuit Board with

mounting tray and

cover

GREAT MATE

INSTALLATION AND SET UP

INSTRUCTIONS

Installation Checklist

Master Motor

Safety Swing Arm assembly with Standard

Gate Bracket

Motor

Mounting

Cradle

Drive Assembly

Slave Motor