AUSTRALIAN MONITOR ACM250P Bedieningshandleiding - Pagina 4

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} AUSTRALIAN MONITOR ACM250P. AUSTRALIAN MONITOR ACM250P 6 pagina's. 250w power amplifier
Ook voor AUSTRALIAN MONITOR ACM250P: Specificatie (2 pagina's)

Pagina afdrukken

XLR Audio Input and Parallel Output

The ACM250P includes both male and female 3 pin XLR connectors. While the female is normally used as the input

to the amplifier, both XLR's are connected in parallel so either will work. When signal is connected to one XLR, the

other XLR becomes a line level output allowing the input signal to be distributed (split) to other amplifiers. In some

projects, the same input may be looped through to multiple amplifiers using this method. Up to 6 amplifiers can be

looped together without any noticeable loss in level. A distribution amplifier should be used when more than 6

amplifiers need to be looped.

The XLR's are wired as follows: Pin 1: Shield. Pin 2: Hot, +, Positive. Pin 3: Cold, -, Negative

Fuse Sizes

Mains 240 VAC - 6 Amperes Slow Blow

DC - 2 x 10 Amperes Slow Blow