AUSTRALIAN MONITOR TX8202 Specificaties - Pagina 2

Blader online of download pdf Specificaties voor {categorie_naam} AUSTRALIAN MONITOR TX8202. AUSTRALIAN MONITOR TX8202 2 pagina's. 8 channel 1 ru mixer
Ook voor AUSTRALIAN MONITOR TX8202: Specificaties (2 pagina's), Bedieningshandleiding (11 pagina's)

Pagina afdrukken

TX8202

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The mixer shall have 4 balanced mic/line inputs and 4 stereo line inputs.

The mic/line channels shall be balanced and feature 3 pin female XLR

sockets. The stereo line channels shall have dual female RCA sockets.

Each channel shall include tamper resistant treble, bass, and pan

controls. The first four channels feature a line level direct output which

can be used to feed additional amplifiers, mixers or recording devices. An

internal jumper shall allow the first four inputs to be removed from the

master left/right outputs while still retaining their direct output function.

The equalization per channel shall provide 12dB cut or boost at 100Hz

and 10dB cut or boost at 10kHz. The master section shall include

individual level controls for both the Left and Right outputs and shall also

include two 7 segment output level LED meters. The master outputs shall

be balanced 3 pin XLR male sockets, and dual RCA female sockets for

the stereo tape output. A ¼" stereo headphone socket shall be included

for monitoring. The mixer shall include on board muting card, as well as a

option for 4 tone generator modules and remote master VCA control. The

mixer shall be of high quality, suitable for both live and commercial

applications. It should have ample headroom and a frequency response of

no less than 50Hz - 15kHz (±3dB). Total Harmonic distortion shall

be no more than 0.1% at 1kHz. The S/N ratio shall be -74dBV or better.

Phantom Power of no less than 15V DC shall be available on all

microphone inputs. An internal switch to disable the phantom power on

any of the mic/line channels shall also be included. The unit shall be

packaged in a rugged 1 RU metal chassis suitable for desk or rack

mounting. The mixer shall be an Australian Monitor Installation Series

model TX8202.

ABOUT

Australian Monitor

Corporate Headquarters

is located in Sydney,

Australia. The

organization has more

than 20 years experience

in the design and

manufacture of audio

amplifiers and

associated products.

They are a dynamic

corporation, priding

themselves on excellent

customer service, better

features and lower priced

products for Sound

Contractors and Audio

Visual Integrators

worldwide.