AUSTRAMAC FLASHCUT 1400 RM Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AUSTRAMAC FLASHCUT 1400 RM. AUSTRAMAC FLASHCUT 1400 RM 14 pagina's. Diamond rock saw
Pagina afdrukken•
Position excavator
1. Operator to ensure excavator is on stable level footings and secure.
2. Operator to follow excavator operating instructions.
3. Never attempt to move or stop the excavator using the saw as a
lever.
4. Operator to complete "two- p o i n t test" at start and of cut to
check alignment
•
Operate saw
1. Operator and others in immediate work area to wear hearing
protection
2. Operator and others in immediate work area to wear eye protection
at all times.
3. Operator to ensure guard and mud flap are in position and in good
condition.
4. Operator to work inside appropriately screened excavator.
5. Operator not to work in same plane as saw.
6. Ensure operator is at least 800mm outside plane of saw.
7. Never place pressure on blade, do not pull through cut.
8. Operator to cut in download motion using weight of saw, complete
cut then raise the saw and move to next cut.
9. Ensure saw is lined up with previous cut and aligned correctly.
10. Do not exceed maximum hydraulic pressure or flow rate of saw (as
indicated on identification label).
11. Keep blade well clear of excavator at all times.
12. Do not remove guards or mud flap.
13. Ensure metal part of blade is touching ground on side mud is being
ejected.
14. If parts of guard are removed for detailed cuts operator to ensure
that appropriate screen is in place to protect operator from being hit
by flying objects. All other persons must be moved to a distance of
30m from saw.
9