Cookworks EM717CKL Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Cookworks EM717CKL. Cookworks EM717CKL 17 pagina's.

3 . CLOCK SETTING
You oven is equipped with a clock. You must set the clock when you first install your oven
or after a power failure. When the microwave oven is connected to mains, The LED display
will show "0:00".
The input time should be within 0:00--23:59;
Example: To set 12:12 .
(1) Press the "
(2) Press the number buttons of "1","2","1","2" in order.
(3) Press "
Note: In the process of clock setting, if "
within 1 minute, the oven will go back to the previous status automatically.
4 . Pre-set function
Example: to start a cooking at 12:12 with current time at 8:00.
(1) Set the preferred cooking function (Microwave / Defrost) but do not press "
start the cooking.
(2) Press "
(3) Press "1", "2", '1", '2" to set the start time.
(4) Press "
(5) Cooks begin when the time arrives.
Note: (1) If the setting is not within the range 0:00–23:59, the setting will be invalid;
(2) In the process of setting, if "
1 minute, the unit will go back to the previous state automatically;
(3) The clock must be set before set the delay start cooking. If the pre-set cooking has
not been programmed and only time to start cooking is set, the whole set will be
regarded as an alarm clock setting and 5 beeps will be sound when the pre-set
time is reached.
5 . DEFROST BY WEIGHT
The defrosting function is the gentle thawing of uncooked food. Flat foodstuff thaws better
than bulky food. Ensure to distribute the food as evenly as possible on the turnable.
Example: Defrost beef of 500g:
(1) Press "
(2) Press "5", "0", "0" in order, the range of defrosting weight is 100g-2000g.
(3) Press "
" button, the 1st figure will flash;
" to finish clock setting.
" to current time will be display and 1st figure will flash.
" to confirm the setting. The unit will turn back to the clock state.
", LED will display "dEF1";
" to start defrosting.
" is pressed or if there is no operation
" is pressed or there is no operation within
8
" to