Austro Flamm LUBA Handmatig - Pagina 8
Blader online of download pdf Handmatig voor {categorie_naam} Austro Flamm LUBA. Austro Flamm LUBA 16 pagina's.
Pagina afdrukken
Luba
Figure 5: Close the Primary Air
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Flat gasket 8 x 2 mm
Round hollow round gasket 6 mm
Round glas fibre gasket 14 mm
Keramott
Description
Bottom left, Keramott
Bottom right, Keramott
Grate
Rear, Keramott
Side component left, Keramott
Side component right, Kermott
Baffle plate rear, Keramott
Baffle plate front, Keramott
Wood retainer, Keramott
Other parts
Description
Luba door glass
Stove lacquer
Wood/coal igniter
Glass cleaner ½ litre
Accessories
You can obtain floor plates of glass or steel, fireplace utensils, care products or the Heat Memory System
for heat storage from your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
6
As soon as the wood logs are burning well, you
can regulate the heating capacity with the
secondary air slider. (Slider set to the maximum
("AUF") setting produces maximum heat – see
Figure 2.)
When adding wood to the fire, follow the same
procedure as when igniting the fire: Open primary
air, open secondary air, carefully open firebox
door, lay wood on the fire, close the firebox door.
Wait until the added wood catches fire and is
burning. Then close the primary air. Subsequently
regulate the fire with the secondary air supply.
Nr. drawing Part number
11
710096
12
718183
13
714223
Nr. drawing Part number
1
712732
2
712731
3
716408
4
712729
5
712736
8
712730
6
712735
7
712734
9
712733
Nr. drawing Part number
10
712702
--
650002
--
640067
--
640070
Keramott numbering = installation instructions!
english