Austro Flamm Chester Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Austro Flamm Chester. Austro Flamm Chester 20 pagina's.

Pagina afdrukken

Chester Xtra

5. SPECIAL FEATURES CHESTER XTRA

Xtra heat storing technology

The model Chester Xtra has been equipped with the unique Xtra heat storing technology. This technology is based on the

patented Heat Memory System, but also on the special flue gas guidance and the convection air which can be regulated or

shut off completely. Consequently a fast heating system is being combined with an extraordinarily efficient heat storing.

The convection air can be regulated according to demand with the attached lever (see picture). The more the convection air

outlets of the top plate are open, the faster heat but less heat storing can be reached. A closed top plate will however lead to

slow heat and longer heat storing.

Our hint: while the fire still burns let the convection air outlets open; close them after the fire has burnt down in order to reach

a steady heat emission.

Operation with external air supply

The German institute for constructional engineering (DIBT) has given the Chester Xtra the general technical approval for

operation with external air supply.. If the combustion air is being supplied directly to the furnace by an air-tight pipe including

closing mechanism from the outside, then the stove may be used in residential property with mechanical ventilation.

If the stove in being used like that, a multiple stove installation on the same chimney is forbidden.

This stove has been approved by the German DIBT.

problem

door glass gets sooty too fast

stove does not get enough

combustion air

stove smells strongly and

there is smoke on the outside

surface

exhaust gas emission while

putting more wood on the fire

and during operation

possible reason

bad chimney draught

incorrect use of the combustion air

supply lever

wood logs are too large

operating temperature was not

reached

chimney draught not sufficient

stove is sooted inside

baking phase of the varnish

stove is dusty/dirty

chimney draught no sufficient, flue

pipe connection leaky

the stove door was opened before

the wood has burnt down to embers

Konvektionsluftschieber = convection air lever

solution

generally: door glasses must be cleaned with

Austroflamm glass cleaner from time to time

(depending on the frequency of use)

contact your chimney sweep (elongate

chimney/draught metering)

please operate air lever according to user's

instructions (if secondary air is closed, the door

glass soots rather fast)

keep to the max. fuel quantity according to user's

instruction

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

contact your chimney sweep (elongate

chimney/draught metering)

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

there may be some odour development during the

first operations

cleaning before the heating season starts!

inspect joints and seal up again if necessary

check chimney draught, examine operating - for info

video follow:

http://www.austroflamm.com/de/Video/index.html

put more fuel wood into the combustion chamber

only if there are only embers left (no more visible

flame)

english