benda ARMOR LINE Micropower 600 Gebruikershandleiding - Pagina 13
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} benda ARMOR LINE Micropower 600. benda ARMOR LINE Micropower 600 16 pagina's.
Pagina afdrukken
Alarm buzzer beeps
Overload of the UPS.
continuously when
AC supply is normal.
When power failure,
1. Overload of the UPS.
back-up time is
2. Battery voltage is too low.
shorten.
3. Battery defect due to high
Mains normal but
Power cord is loose.
Yellow LED is
flashing.
temperature operation
environment, or improper
operation to battery.
Verify that the load matches the UPS
capability specified in the specs.
1. Remove some non-critical load.
2. Charge battery 8 hours or more.
3. Replace with the same type of
battery.
Reconnect the power cord properly.