Bresser BR-S150B PRO Gebruiksaanwijzing - Pagina 4
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Bresser BR-S150B PRO. Bresser BR-S150B PRO 12 pagina's. Led panel light
Pagina afdrukken
REMOTE CONTROL
USING A DMX CONTROL PANEL*
1. Connect your DMX control panel* with the light through the
DMX sockets (5) by using a suitable RJ45 connection cable*.
2. Turn on the light and the DMX control panel*.
2. Press the DMX/2.4G button (12). DMX function is enabled
when the corresponding indicator (10) lights up. When
DMX function is enabled, the light can only be controlled
through the DMX control panel*.
USING THE 2.4G REMOTE CONTROL
1. Press the Power button (20) to switch on the unit.
2. Long press the Power button (20) to switch off the unit.
MOVING THROUGH THE MENU
Press the Menu button (21) to move through the menu.
Press 1x = shows 10 "Brightness"
Press 2x = shows 56 "Colour temperature" 56 = 5600 K
Press 3x = shows 01 "Channel"
Selecting a channel
1. Press the Menu button (22) three times to go to the
channel menu.
2. Press + or – (21/23) to choose the desired channel.
3. Press the Menu button (22) to confirm your selection.
TURNING ON/OFF THE LIGHT
1. By default, the light status of the selected channel is
"OFF".
2. Press the Power button (20) to turn the light on.
3. Long press the Power button (20) to turn off the light.
ADJUSTING THE BRIGHTNESS
1. By default, the brightness level is 10% when the device
is turned on.
2. Press + or – (21/23) to increase or decrease the brightness.
ADJUSTING THE COLOUR TEMPERATURE
1. Press the Menu button (22) to select the colour
temperature for the current channel.
2. Press + or – (21/23) to choose the desired colour
temperature.
ADJUSTING THE TILT ANGLE
1. Hold the light and slowly loosen the locking lever (3) for the
tilt joint.
2. Move the light head to the desired position and tighten the
locking lever (3) again hand-tight.
MOUNTING ON A TRIPOD*
1. Loosen the fixing screw (7) for the tripod connection (16) so
far that the opening of the tripod connection is exposed.
2. Place the light with the opening of the tripod connection
(16) on the spigot adapter* of a tripod* and tighten the
fixing screw firmly.
DISPOSAL
Dispose of the packaging materials properly, according to their
type, such as paper or cardboard. Contact your local waste-
disposal service or environmental authority for information on
the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per the Directive 2002/96/EC of the European Parliament on
waste electrical and electronic equipment and its adaptation
into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries and
rechargeable batteries, disposing of them in the normal
household waste is explicitly forbidden. Please make sure to
dispose of your used batteries as required by law — at a local
collection point or in the retail market. Disposal in domestic
10 = 10%
waste violates the Battery Directive. Batteries that contain toxins
are marked with a sign and a chemical symbol.
01 = 1
Cd¹
TECHNICAL DATA
Model
Output Power
Luminous Flux
LED Quantity
Color Temperature
Light Source
Color Rendering Index (CRI)
Dimmer
Remote Control
Remote Control Distance
DMX512 dimmer
(optional)
Lithium Battery* Type
DC Power Input
Adapter
Size (excl. U-bracket)
battery contains cadmium
1
battery contains mercury
2
battery contains lead
3
Hg²
Pb³
BR-S150B PRO
150W
15000LM
1700 pcs
3200K-5600K
continous adjustment
0.2W SMD LED
≥95
10 - 100%
99 channels;
2.4G wireless remote control
>50M
YES, RJ45 interface
SONY BP V type series
DC36V
DC36V 5A GX16-2(plug)
300*480*46mm
*not included