2Face Time Keeper Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} 2Face Time Keeper. 2Face Time Keeper 18 pagina's.

Pagina afdrukken

3.3 Main Device

3.3.1 Buttons

Figure 3-1. Keyboard of Main Device

1) EMS button

When you choose EMS Mode:

--Turn unit ON by pressing the EMS button on the

front of your device.

--Adjust the intensity level to your comfort by

progressively pressing the EMS button to increase or

decrease the microcurrent output. As you toggle

between the 3 intensity levels, the number of

illuminated blue lights will change. At the 0 level no

light will be illuminated, and there are no microcurrent

output. At 1 level, all one blue lights will be

illuminated. At the 2 level two blue light will be

illuminated. At the 3 level three blue light will be

illuminated.

--Turn off the 2Face/Face Evolution Device by

pressing the EMS button after every treatment. The

device will emit a beep when device is turning off.

The 2 Face / Face Evolution Device will automatically

turn off after approximately 5 minutes of use.

2) PHOTON button

It provides continuous heat therapy through the use of

PHOTON function. SuS304 treatment probe is

intended to be placed directly on the skin to provide

topical heating. (41℃±2℃）

When you choose PHOTON Mode:

--Turn the unit ON by pressing the PHOTON button.

The first light is Green Light, to show the Photon

function is turned on. It has low power testing function,

when the power is lower than 3.0Volts, the green

indicate light will be twinkling.

--The Second light is RGB Light, which shows the

Photon therapy mode is working. Adjust the Light

mode to your aimed function by pressing the

PHOTON button repeatedly. Place the treatment

surface (massage head) on your skin, the RGB Light

Indicator will automatically activate.

Apply light pressure while slowing moving the device

in small circular motions, the treatment surface

temperature will slowly increase.

Perform the treatment for 5-7 minutes on each area.

Press one time, the Red light works and the RGB

Light Indicator turns Red;

Press second time, the Green light works and the

RGB Light Indicator turns Green;

Press third time, the Blue light works and the RGB

Light Indicator turns Blue;

Press forth time, the White light works and the RGB

Light Indicator turns white。 It means all the Red,

Green and Blue lights work simultaneously.

-- The Third light is Red-Green double color light,

when charging, the light turns red and it will turn to

Green when full charged.