AUTEC Air series Originele handleiding - Pagina 12

Blader online of download pdf Originele handleiding voor {categorie_naam} AUTEC Air series. AUTEC Air series 16 pagina's. Receiving unit
Ook voor AUTEC Air series: Handmatig (8 pagina's), Handmatig (13 pagina's), Handleiding voor gebruik en onderhoud (20 pagina's), Handmatig (12 pagina's), Handleiding voor gebruik en onderhoud (20 pagina's), Originele handleiding (8 pagina's), Originele handleiding (8 pagina's), Handmatig (8 pagina's), Originele handleiding (8 pagina's)

Address storage

When the battery is charged and the Air-KEY is in the "BACK-UP UNIT", perform the following

procedure to store the address:

1. press the START pushbutton until the green and the red LEDs illuminate and an acoustic

signal sounds

2. wait until the green LED blinks slowly

3. within 3 seconds, activate in sequence the commands corresponding to PIN 1, PIN 2 and

PIN 3 that compose the PIN code given in the technical data sheet.

If the PIN code is incorrect, the red LED illuminates and the transmitting unit switches off. In

this case, the storage procedure shall be repeated.

If the PIN code is correct, the green LED turns steady on and the transmitting units switches

off: this indicates that the address has been stored in the "BACK-UP UNIT". It is now

possible to start the radio remote control and control the machine with the "BACK-UP UNIT"

transmitting unit.

7.3

START pushbutton

The START pushbutton is used to:

- start the radio remote control (see paragraph 6.1)

- activate the horn when the radio remote control is started.

7.4

The STOP pushbutton should be pressed when it is necessary to immediately

stop the machine when a dangerous condition occurs.

When the STOP pushbutton is pressed, the machine stops and

the transmitting unit switches off.

To start working again after the STOP pushbutton has been

pressed:

1. make sure that the working and usage conditions are safe

2. turn the STOP pushbutton in the arrow direction to unlock it

3. start the radio remote control (see paragraph 6.1).

LIAJSE00-00

Operation

AUTEC - Air series