Bender ATICS DIO Series Snelstarthandleiding - Pagina 6
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Bender ATICS DIO Series. Bender ATICS DIO Series 13 pagina's. Automatic transfer switching devices for safety power supplies
Pagina afdrukkenATICS-...-DIO Quick start
Connection ATICS-4-DIO
Terminal
1, 3, 5, 7
9, 11, 13, 15
10, 12, 14, 16
NC, NC
GND, En/Ex
IN1/GND, IN1
NC, NC
24, 34, 44, 21
IN2, IN3, IN4, IN2-4 GND
A, B
NC, NC, NC
14, 12, 11
l1, l2, l3, l4,
k1, k2, k3, k4
Warning: Risk of destruction if connection incorrect
►
The terminals labelled GND must not be connected to PE.
Alle Rechte vorbehalten. Nachdruck und Vervielfältigung nur mit
Genehmigung des Herausgebers. Änderungen vorbehalten!
©
Bender GmbH & Co. KG
Fotos: Bender Archiv.
Bender GmbH & Co. KG
P.O. Box 1161 • 35301 Gruenberg • Germany
Londorfer Strasse 65 • 35305 Gruenberg • Germany
Tel.: +49 6401 807-0 • Fax: +49 6401 807-259
E-mail: [email protected] • www.bender.de
6
Meaning
Connection line 1 (input line) 1L1, 1L2, 1L3, 1N
Connection line 2 (input line) 2L1, 2L2, 2L3, 2N
Connection line 3 (output line) L1, L2, L3, N
not used
Connection must not be used. These terminals are solely intended for future extensions!
Digital input, configurable, for example, for monitoring the switch position of the transfer switching
device
not used
3 alarm relays (1 N/O contact each), 21 = common connection for the three alarm relays
3 digital inputs
BMS bus connection
not used
Alarm relay, programmable function
Connection measuring current transformer T1 (T4) for monitoring the load current downstream the
transfer switching device (short-circuit monitoring).
Note: Insert the plug until it noticeably clicks into place!
All rights reserved. Reprinting and duplicating only with
permission of the publisher. Subject to change!
ATICS-DIO_D00080_02_Q_XXEN/04.2017
©
Bender GmbH & Co. KG
Photos: Bender archives.