BENDIX R-14 Technisch bulletin - Pagina 2

Blader online of download pdf Technisch bulletin voor {categorie_naam} BENDIX R-14. BENDIX R-14 2 pagina's. Relay valves
Ook voor BENDIX R-14: Handmatig (6 pagina's)

Pagina afdrukken

Bulletin No: TCH-013-017

Protect Your Bendix

Subject:

De-icing Chemicals

WARNING!

Please READ and follow these instructions to

avoid personal injury or death:

When working on or around a vehicle, the following general

precautions should be observed at all times.

1. Park the vehicle on a level surface, apply the parking

brakes, and always block the wheels. Always wear safety

glasses.

2. Stop the engine and remove ignition key when working

under or around the vehicle. When working in the engine

compartment, the engine should be shut off and the ignition

key should be removed. Where circumstances require that

the engine be in operation, EXTREME CAUTION should be

used to prevent personal injury resulting from contact with

moving, rotating, leaking, heated or electrically charged

components.

3. Do not attempt to install, remove, disassemble or

assemble a component until you have read and thoroughly

understand the recommended procedures. Use only the

proper tools and observe all precautions pertaining to use

of those tools.

4. If the work is being performed on the vehicle's air brake

system, or any auxiliary pressurized air systems, make

certain to drain the air pressure from all reservoirs before

beginning ANY work on the vehicle. If the vehicle is

equipped with an AD-IS

reservoir module, be sure to drain the purge reservoir.

Reference Service Data Sheets:

ATR-1

ATR-2

R-14

ACom

(Free downloads available on www.bendix.com)

ABS Repair and Diagnostics DVD . . . . . . . . . . . . . . . . . . . . . . BW2538

Visit the Literature Center on www.bendix.com for free downloads of Service Data

Sheets or to order copies.

For more information, contact your local Bendix representative

or the Bendix Technical Assistance Team at 1-800-AIR-BRAKE

(1-800-247-2725) Monday through Friday, 8:00 A.M. to 6:00 P.M. EST,

and follow the instructions in the recorded message. Or, you may e-mail

the Bendix technical assistance team at: [email protected].

Effective Date: 7/30/08

ATR-1

air dryer system or a dryer

™

Antilock Traction Relay Valve . . . . . . . . . . . . SD-13-4811 (BW1794)

™

Antilock Traction Relay Valve . . . . . . . . . . . . SD-13-4812 (BW1791)

Relay Valve . . . . . . . . . . . . . . . . . . . . . . SD-03-1064 (BW1431)

™

Diagnostics PC Software . . . . . . . . . . . . . . . . . . . . . . BW2329

Cancels: N/A

™

, ATR-2

and R-14

5. Following the vehicle manufacturer's recommended

procedures, deactivate the electrical system in a manner

that safely removes all electrical power from the vehicle.

6. Never exceed manufacturer's recommended pressures.

7. Never connect or disconnect a hose or line containing

pressure; it may whip. Never remove a component or

plug unless you are certain all system pressure has been

depleted.

8. Use only genuine Bendix

and kits. Replacement hardware, tubing, hose, ﬁ ttings,

etc. must be of equivalent size, type and strength as

original equipment and be designed speciﬁ cally for such

applications and systems.

9. Components with stripped threads or damaged parts

should be replaced rather than repaired. Do not attempt

repairs requiring machining or welding unless speciﬁ cally

stated and approved by the vehicle and component

manufacturer.

10. Prior to returning the vehicle to service, make certain all

components and systems are restored to their proper

operating condition.

11. For vehicles with Antilock Traction Control (ATC), the ATC

function must be disabled (ATC indicator lamp should be

ON) prior to performing any vehicle maintenance where

one or more wheels on a drive axle are lifted off the ground

and moving.

Page: 2 of 2

Relay Valves from

replacement parts, components