BENDIX EC-30 ECU Installatie-instructies - Pagina 2

Blader online of download pdf Installatie-instructies voor {categorie_naam} BENDIX EC-30 ECU. BENDIX EC-30 ECU 3 pagina's. Replacement kit

Pagina afdrukken
Steps 2 through 5 are needed only if the vehicle does
not support PLC.
2. Using a diagnostic tool, look for an active Trailer ABS
Warning Lamp Open (Dash Mounted) Diagnostic Trouble
Code (DTC). The DTC will be found as an active DTC,
however, the ABS indicator lamp will not be illuminated.
See Figure 2 for typical ACom
screen showing the Trailer Indicator Lamp DTC.
FIGURE 2 - DTC: INDICATOR LAMP OPEN
™
When using ACom
Diagnostics (version 5.9 and higher),
the confi guration screen will show a confi guration item
under Antilock, which will display:
In-Cab Trailer Warning Lamp – Enabled (PLC) or Disabled
(No PLC) - see Figure 3:
FIGURE 3 - ACOM
™
DIAGNOSTICS: IN-CAB TRAILER LAMP
3. To disable PLC, Bendix
or higher) is required. The technician will need to open the
confi guration screen and see if the current confi guration
shows PLC being used. In addition, verify that the in-cab
trailer lamp (located under "Antilock" in the confi guration
window) is confi gured for PLC.
4. To change the setting, select the "Modify" button on the
right side of the confi guration screen to open the "Change
Confi guration" window. See Figure 4.
Click inside the box to remove the check mark, disabling
the In-Cab Trailer Lamp.
FIGURE 4 - CHANGE CONFIGURATION: IN-CAB TRAILER
LAMP
Removing the check mark switches off the PLC feature,
disables the in-cab trailer lamp and will also clear the
active Trailer ABS Warning Lamp Open DTC. See Figure
5.
2
™
diagnostic trouble code
®
ACom
™
Diagnostics (version 5.9
FIGURE 5 - IN-CAB TRAILER LAMP DISABLED
5. The confi guration screen will now display "In Cab trailer
lamp: Disabled", showing that the configuration is
complete. See Figure 6.
FIGURE 6 - CONFIGURATION WINDOW: IN-CAB TRAILER
LAMP DISABLED
™
6. Use the ACom
diagnostic program to check that there
are no active DTCs before returning the vehicle to service.
Additional Assitance:
If there are communication issues, or the confi guration
is unsuccessful after several attempts, contact Bendix at
1-800-AIR-BRAKE (1-800-247-2725), Monday through
Friday, 8:00 A.M. to 6:00 P.M. EST. Please have the following
information ready when you call: Bendix product model
number, part number and confi guration, vehicle make and
model, vehicle confi guration (number of axles, tire size, etc.).
Reference:
The full Service Data sheet for the Bendix
ATC Controller is SD-13-4815 (BW2160) and is available
for download on www.bendix.com, or order copies from the
Literature Center at the website.
®
™
Bendix
ACom
Diagnostic Software is available for free
download from www.bendix.com, or order copies from the
Literature Center at website.
®
EC-30
™
ABS /