Airwell RC 08B Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Airwell RC 08B. Airwell RC 08B 7 pagina's.

Pagina afdrukken

OPERATIION

In cooling mode or dehumidifying mode, 1 hour after the sleep curve is set, the setting

temperature will rise by 1 degree C , 2 hours later, the setting temperature will rise by 2

degree C. After 2 hours, the setting temperature will not change any more.

In heating mode, 1 hour after the sleep curve is set, the setting temperature will

decrease by 1 degree C 2 hours later, the setting temperature will decrease by 2

degree C. After 2 hours, the setting temperature will not change any more.

I FEEL/ROOM TE MP FUNCTION OPERATION

Press button I FEEL to activate the I FEEL function. Thermometer sign will appear on

the LCD operation display

.Select suitable temperature setting. Make sure that

the remote control unit is aimed at the air conditioner. Prevent the I FEEL sensor from

being affected by heat sources such as lamps, heaters, direct sun, etc. or from being

directly affected by the air conditioner air flow.These may cause the sensor to transmit

the wrong temperature data, thereby disturbing the performance of the I FEEL function.

The LCD display shows actual room temperature under I FEEL mode, press any

button will switch the temperature display to set temperature, and 3 seconds later,

system will revert back to the room temperature display.

LOCK FUNCTION

By pressing - and + bottoms simultaneously to lock the last operation program. All the

function buttons will be inoperative, including POWER button. By pressing both buttons

again the remote control will be released from its locked position.

SETTING THE TIMER

The timer can be selected by pressing TIMER button.

The daily timers can be set for ON and OFF separately for two different time periods.

Timer setting will not change until new setting is input.

A) HOW TO SET THE ON TIME

1. Press the TIMER button to select the ON Timer

2. Press the + or - button until the desired value

is displayed.

3. Wait for 3 seconds and the timer is activated.

B) HOW TO SET THE OFF TIME

1. Press the TIMER button to select the OFF Timer

2. Press the + or - button until the desired value

is displayed.

3. Wait for 3 seconds and the timer is activated.

C) HOW TO ACTIVATE THE TIMER REPEATING FUNCTION

• On the first time connecting to the power, if pressing the RP button, the default ON timer

is 7:00 and OFF timer is 18:00.

• Press RP button after Timer ON-OFF has been set will initiate Timer repeating function

with current Timer ON-OFF setting or the Timer ON-OFF setting adjusted after.

• Press RP button when there is no Timer ON-OFF setting will initiate Timer repeating

function with previous Timer ON-OFF settings and transmit the signals to the unit.

• When the Timer Repeat function is activated, press the RP button again to cancel the

Timer Repeat function.

NOTE:

Please keep the remote control where its signals can reach the receiver of the unit. When

you select the timer operation, the remote control automatically transmits a signal to the

indoor unit at the specified time.

OPERATIION

R P

MODE

TIMER

CLR

SLEEP

TURBO

CLEAN

I FEEL

EYE

ION

LIGHT