dymax BlueWave 200 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dymax BlueWave 200. dymax BlueWave 200 16 pagina's. Handheld diaphragm valve
Ook voor dymax BlueWave 200: Snel aan de slag Instructies (2 pagina's), Snel aan de slag Instructies (2 pagina's), Snel aan de slag Instructies (2 pagina's), Snel aan de slag Instructies (2 pagina's)

Model 200 Dispensing Valve User Guide

Assembly Instructions

Slide the Standoffs (F) through the bottom of the Valve Top Cap (A) and rotate the

threaded sides outward.

Place the Handle (G) in between the Standoffs (F) and insert the Dowel Pin (J) to

hold in place.

Using a .050" Allen key, thread the two Set Screws (K) into the Standoffs (F) to hold

the Dowel Pin (J) in place, but leave loose until the valve is assembled.

Place the Spring (H) over the Plunger (D) and insert the assembly through the

bottom of the Valve Top Cap (A) and through the cutout in the Handle (G).

Thread the Stroke Adjustment Nut (E) onto the Plunger (D) to hold the Plunger (D)

and Handle (G) assembly together.

Using a .050" Allen key, thread the Set Screw (K) into the Stroke Adjustment Nut

(K).

Place the Diaphragm (B) onto the groove of the Fluid Section (C) with the thin

Teflon® side down, against the fluid.

NOTE: The diaphragm must be assembled into the valve with the Teflon® side

facing the fluid. The Teflon side is the thinner, smooth side.

Mount the Valve Top Cap (A) over the Diaphragm (B) and assemble to the valve's

Fluid Section (C) using the four Socket Head Cap Screws (L). Tighten the Socket

Head Cap Screws down evenly with a 9/64" Allen key.

Tighten the two Set Screws (K) that thread into the Standoffs (F) using a .050" Allen

key.

10. Thread the Plastic Luer Adapter (I) into the bottom of the valve's Fluid Section (C)

and tighten using an adjustable wrench.

NOTE: Be sure not to over tighten the Plastic Luer Adapter (I).