dymax 43632 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dymax 43632. dymax 43632 16 pagina's. Ax light shield kit

Pagina afdrukken

Operation

For a detailed description of the BlueWave
curing system operation, maintenance, and
troubleshooting, see the BlueWave
System User Guide. Below is a general, suggested
sequence of activities that can be altered to better match
your working conditions, process requirements, and work
habits.
1.
To begin production curing, place the item to be
cured inside the Light Shield. Close the Door and a
click sound should be heard.
2.
Initiate the cure cycle by pressing the Foot Switch or
Rotary Push Button on the front panel of the
BlueWave
AX-550 Controller. If using the Rotary
®
Push Button, make sure to first highlight the
Stop/Run Screen Icon (Figure 12)
3.
Once the cure cycle is completed, open the Light
Shield and unload the cured parts.
4.
If the Light Shield's Door is opened at any time, the
"LED INHIBIT OPEN" message will be shown
on the screen and the curing cycle cannot be
started. If the Door is opened during a cycle, the
cycle will be terminated immediately and the "LED
INHIBIT OPEN" message will appear on
the screen.
NOTE: Once a cycle has been terminated due to
door opening, the door must be shut and cycle
restarted; it does not automatically restart upon
shutting the door.
Cleaning & Maintenance

General

For detailed technical assistance, please call the Dymax
Application Engineering.

Light Shield

The light shield is designed to be maintenance free.
Periodic cleaning will ensure long, trouble-free operation.
BlueWave
AX-550 LED Curing System
®
See the BlueWave
®
AX-550 LED Curing System User
Guide for maintenance recommendations.
|
10
D Y M A X . C O M
®
AX-550 LED
AX-550 LED Curing
®
Stop/Run Icon
Rotary Push Button
Figure 12.
Stop/Run Screen Icon Selection
U SE R G U I D E
|
A X - 5 5 0