Agria 5556 111 Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Agria 5556 111. Agria 5556 111 20 pagina's. Mounted twin sickle
Pagina afdrukken3. Devices and Operating Elements
Mounting to the Base
Machine
W
Mounting and dismantling of
the sickle mower is only per-
mitted with the engine and the
sickle knives standing still. Secure im-
plements against rolling off and pay
attention to squeezing points during
mounting.
Perform mounting and dismantling on
solid ground.
The sickle mower is a front-driven imple-
ment.
agria 3400
Turn steering handle by 180° so that the
engine is at the rear seen in driving di-
rection (see operating instructions for the
base machine).
Tool Carrier agria 5500
The steering handle is already in the
correct position.
agria 3400 and 5500
Mounting and dismantling to/from the
agria base machines Type 3400 or 5500
is made with the agria quick-coupling
system as described in the operating
instructions for the base machines.
Mount safety shifting lever (9) for the
knife brake with bolt (12) and R-clip (13)
to the pre-assembled bearing clip (First
mounting, page 8).
Introduce adjusting screw (11) of the
bowden cable into the counter-bearing
angle and tighten hexagon nut (10).
Edition 06.97
Mounted Twin Sickle Mower 5556 111
Check adjustment.
If necessary, re-adjust with adjusting
screw (11).
9 Safety lever for knife brake
10 Hexagon nut
11 Bowden cable adjusting screw
12 Bolt
13 R-clip
With the safety lever
completely pressed
down (operating posi-
tion), the knife brake
must be released.
With the safety lever
released (stop posi-
tion), the knife brake
must be in braking po-
sition.
9