Dymo LabelManager 500TS Snelle referentiehandleiding - Pagina 2
Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Dymo LabelManager 500TS. Dymo LabelManager 500TS 17 pagina's. Dymo labelmanager 500ts label maker
Ook voor Dymo LabelManager 500TS: Gebruikershandleiding (19 pagina's), Gebruikershandleiding (19 pagina's), Overzicht (2 pagina's), Specificaties (2 pagina's), Beknopte handleiding (2 pagina's)
Pagina afdrukken
Connecting the Power
The label maker is powered by a rechargeable, Lithium Polymer (LiPo) battery pack.
Inserting the Battery
The battery pack included with your label maker comes partially charged.
Make sure the charging adapter is disconnected before handling the
LiPo battery pack.
To insert the battery
Lift the back cover of the label maker.
1
Insert the battery into the battery compartment
2
following the polarity markings (+ and -).
Close the back cover of the label maker.
3
Make sure to read the LiPo Safety Precautions
found on page 15.
Removing the Battery
Remove the battery pack if the label maker will not be used for a long period
of time.
Make sure the charging adapter is disconnected before handling the
LiPo battery pack.
To remove the battery
Unplug the charging adapter.
1
Lift the back cover of the label maker.
2
Remove the battery from the battery compartment.
3
Make sure to read the LiPo Safety Precautions found on page 15.
2