GABOR UPM-360 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} GABOR UPM-360. GABOR UPM-360 12 pagina's. Universal projector mount

Attaching the Projector

1. Determine which screws (M2.5 and M3 (with included washers),M4, M5, or

M6) and spacers (3, 4, or 6 mm) to use with your projector.

2. Loosen the projector mount's arms with a Philips screwdriver. If your

projector model has only three holes, then remove the fourth arm with the

screwdriver.

3. Slide the arms along their track, and position them over the projector's

mounting holes.

4. Use a Philips screwdriver to secure the mount to the projector, using the

screws from step 1.

5. Make sure the weight of the projector is as evenly distributed as possible

before tightening the screws of the arms along the track.

6. Hang the projector from the rotating column's hooks, and tighten the bolts

with the included hex wrench to secure the projector into position.

Note: If you have a tall ceiling or

need extra space away from a wall

when attaching this mount, use a

compatible 1.5 NPT extension

column (not included).

Please refer to the instructions

Using a 1.5 NPT Extension

listed in

Column.