Dymo PL100 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dymo PL100. Dymo PL100 11 pagina's. Portable labeler

Pagina afdrukken

About Your New Printer

With your new 3M™ Portable Labeler PL100

printer, you can create a wide variety of high-

quality, self-adhesive labels. You can choose to

print your labels in many different sizes and styles.

The printer uses 3M™ Portable Labeler Refill

Cartridges in widths of 3/8" (9 mm) and 1/2"

(12 mm). Label cartridges are also available in a

wide range of materials.

Visit www.3m.com/electrical for information on

obtaining labels and accessories for your printer.

Product Registration

Please visit www.3m.com/portablelabeler to

Getting Started

Follow the instructions in this section to start

printing your first label.

Inserting the Batteries

The printer uses six AAA batteries. To save power,

the printer will automatically turn off after two

minutes of inactivity.

To insert the batteries

1. Press the thumb catch on the back of the printer

to open the battery compartment door. See

Figure 2.

Figure 2

2. Insert the batteries following the polarity

markings (+ and –).

3. Close the battery compartment door.

Remove the batteries if the printer will not be

used for a long period of time.

Inserting the Label Cassette

Your printer comes with one label refill cartridge.

Visit www.3m.com/electrical for information about

purchasing additional label cartridges.

To insert the label cartridge

1. Slide the latch to open the label cartridge door.

See Figure 3.

The first time you use the printer, remove

the protective cardboard insert from between the

print head and pinch roller.

Remove

cardboard

insert

Slide latch

to open

Figure 3

2. Make sure the label and ribbon are taut across

the mouth of the cartridge and that the label

passes between the guideposts. If necessary,

turn the spool clockwise to tighten the label. See

Figure 3.

3. Insert the cartridge with the label and ribbon

positioned between the print head and pinch

roller. See Figure 4.

Turn spool to

tighten label