Dymo PL100 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dymo PL100. Dymo PL100 11 pagina's. Portable labeler

Pagina afdrukken

Printing Modes

Two print modes are available in addition to

Normal: fixed length and flag mode. Pressing

returns you to normal printing mode.

NORMAL

Printing Fixed Length Labels

Normally, the length of the label is determined by

the length of the text entered. However, you may

wish to make a label for a specific purpose that is a

fixed length regardless of the length of the text.

You can specify a fixed length for a label in 0.10"

(2 mm) increments between 1.50" (40 mm) and

20.00" (500 mm). The default fixed length is 2.00"

(50 mm). Any change you make to the fixed length

setting remains in effect until you change it.

To set the label length

1. Press

LENGTH

2. Use the arrow keys to increase or decrease the

length and press

3. Press

When you attempt to print with the fixed

length set smaller than the length needed to print

the label text, an error message is displayed

indicating the minimum allowable length.

Printing in Flag Mode

Flag labels wrap around a wire or cable leaving the

text part of the label extending out from the cable.

See Figure 9.

D.01



Figure 9

The text on flag labels is automatically printed on

both ends of the label leaving a blank space in the

middle that wraps around the cable. When the label

LENGTH

FLAG

is applied to the cable, both ends of the label are

applied back to back leaving a tail or flag. The

result is a label that can be read from both sides.

To print a flag label

1. Enter the text for the label.

2. Press

and then press

FLAG

3. Press

Printing Options

You can choose to print your labels vertically, print

multiple copies of the same label, print serialized

labels, or print multiple copies of serialized labels.

Printing Vertical Labels

Single-line labels can be printed with the text

running vertically.

To print vertically

1. Enter the text for your label.

2. Press

and then use the arrow keys to turn

VERT

on vertical printing.

3. Press

Printing Multiple Copies

You can print up to 16 copies of the same label at

one time. When printing multiple copies, a dotted

cut-line is printed between each label.

To print multiple copies



1. Press

2. Press

to increase the number of copies to

print. The default is two copies.

3. Press

to decrease the number of copies.

4. Press

to begin printing.

You may notice a brief pause in printing

between each label for more complex formats.

When printing is finished, the number of copies to

print returns to 2.

VERT