Dymo RhinoPRO 6000 Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dymo RhinoPRO 6000. Dymo RhinoPRO 6000 17 pagina's. Electronic labelmaker
Ook voor Dymo RhinoPRO 6000: Snelle referentiehandleiding (2 pagina's)
Pagina afdrukken
UL/BOX
NEW
+
UL/BOX
WIDTH
JUSTIFY
+
WIDTH
M in
MC
+
M in
COPIES
123...n
+
COPIES
CASSETTE
LENGTH
+
CASSETTE
VERT
COLOUR
+
VERT
®
DYMO
6000 Labelmaker
One press underlines the complete label.
A second press puts a line box around the complete label.
Pressing a third time gives underline and line box.
Press again to cancel and return to normal text.
Clears the current label from the display and resets the Labelmaker
to normal settings — i.e. auto-scaling, normal text, normal width,
left-justified, all function options OFF.
Selects double, reduced or normal width characters, as shown
on the display. Affects the whole label.
The complete label is normally left-justified (L), i.e. each line starts
at the left-hand side. Press to step through centred ( ) right justified
( ) or return to left justified.
Press to store a copy of the current label in the next available
memory space. The display will change to show 'M' for one second
to confirm — see 'Memory', page 15.
Press
+
Can only be used after using 'MR' or 'SEARCH' functions.
Displays a small box enabling you to use
number of multiple copies of a label. Press ESC to cancel.
Enables a number label or barcode label to be incremented by 1 on
each of up to 100 copies of a label. Press ESC to cancel.
Press to select the correct label format for the tape cassette
installed. If the label format/tape width are incompatible, there will
be no response to the
the tape width installed; flashing stops when the correct label
format is selected. Note that the layout of the text on the label may
be altered.
Displays the current label length. Press ESC to cancel or use
to increase or decrease the label length in 2mm (
Label length can be fixed with the text justified to the left, centre or
right of the label (
length of the label (|A| displayed) — see page 33.
Rotates the complete label through 90 , as indicated in the display.
Text is printed vertically. Press again to cancel.
Press to change the print colour of the label at the cursor position.
MC
to clear a stored label from the memory.
M in
key and the display will flash to show
PRINT
displayed), or the text can be scaled to fit the
or
to select the
") steps.
/¡º
1
or
11