GAC SYC6714 Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} GAC SYC6714. GAC SYC6714 6 pagina's.
Pagina afdrukken
1
Overview
The GAC SYC6714 accessory module adjusts a speed control unit to
obtain an equal AC phase relationship between the generator and the
main bus (mains). When paralleling a synchronous generator to a main
bus, generators, or utility.
The SYC6714 provides the SYNC CHECK function which activates a
relay to connect the generator to the main bus. Typically this takes less
than 3 seconds when the generator sets are at rated speed and using
optimum speed controller performance settings.
The GAC SYC6714 is a CE (Community Europe) approved unit the
installation requirements must be met to maintain EMC capabilities.
2
SpeCifiCatiOnS
GENERATOR AND MAIN BUS AC INPUT
Sensitivity
Frequency
Isolation
Burden
BATTERy/DC POwER SUPPly REqUIREMENTS
(TERMINAlS 8-10)
Low Voltage Range
(Terminals 8 & 9 connected)
High Voltage Range
Current Required
PERfORMANCE (wITh
ESD
Capture Range
Output Voltage
Breaker Closure Window Angle
Relay Contact Rating
(N.O. or N.C.)
Phase Error Adjust Range
SYC6714
Synchronizer
50 V RMS - 500 V RMS
(line-to-line or line neutral)
50 or 60 Hz nominal
1000 V minimum
less than 2.5 V A
10 - 16 V DC
14 - 40 V DC
less than 200 mA
SERIES)
+4% based on 3250 Hz
3 - 7 V DC
1 ° - 25 °
10 A @ 28 V DC
+/- 10° typical
ENvIRONMENTAl
Temperature Range
Humidity
Vibration
Corrosion resistant and fungus proof IP22
Case
PhySICAl
Dimensions
Weight
Mounting
1
Governors America Corp. © 2021 Copyright All Rights Reserved
-40 to +180° F [ -40 to +85°C]
up to 100 %
5g (20 – 200 Hz)
with terminal cover in place
5.72 [146] x 7.03 [179] x 1 in [25]
1.5 lb [0.68 kg]
any position, vertical preferred
SYC6714 03-2021-B2
PIB4030