Dymo LabelWriter 450 Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dymo LabelWriter 450. Dymo LabelWriter 450 10 pagina's. How to order and insert a roll of labels in the dymo labelwriter
Ook voor Dymo LabelWriter 450: Snelstarthandleiding (20 pagina's), Snelstarthandleiding (14 pagina's), Overzicht (2 pagina's), Installatiehandleiding (11 pagina's), Gebruikershandleiding (19 pagina's), Installatiehandleiding (16 pagina's), Handleiding (3 pagina's)

3. Connecting your LabelWriter Printer

Do not connect the printer to your computer

NOTE

until instructed to do so during the software

installation.

To connect the power

Plug the power cord into the power adapter.

See Figure 4.

Plug the power adapter into the power connector

on the bottom of the printer. See Figure 5.

Plug the other end of the power cord into a

power outlet.

Plug the USB cable into the USB port on the

bottom of the printer. See Figure 5.

Insert the power and USB cables through the

cable channel and set the printer down.

DO NOT CONNECT the other end of the USB cable to

NOTE

your computer until asked to do so during the software

installation.

When prompted by the software installer, plug the USB

cable into a USB port. See Figure 6.

PAGE 5 OF 10

Power cord

USB

Cable

channel

H-1265

Power adapter

Figure 4

Power

USB

24VDC

Figure 5

Figure 6

1013 IH-1265