Dymo LabelWriter 450 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dymo LabelWriter 450. Dymo LabelWriter 450 19 pagina's. How to order and insert a roll of labels in the dymo labelwriter
Ook voor Dymo LabelWriter 450: Snelstarthandleiding (20 pagina's), Snelstarthandleiding (14 pagina's), Overzicht (2 pagina's), Installatiehandleiding (11 pagina's), Snelstarthandleiding (10 pagina's), Installatiehandleiding (16 pagina's), Handleiding (3 pagina's)

Your LabelWriter printer should offer years of trouble-free printing with very little maintenance.

However, in the event that you encounter a problem, this chapter offers suggestions for resolving

problems that can occur when using the printer. If you are unable to solve a problem, this chapter

also describes how to contact DYMO Technical Support.

This section provides information on how to detect and correct problems you might encounter

while using your LabelWriter printer.

The status light visually shows the current state of the printer:

•

If you experience problems with broken characters or other print quality issues, perform a printer

self-test. The self-test verifies that all elements of the print head and printing mechanism are in

working condition.

To perform a self-test

To clear labels that have become jammed in the printer

Solid blue - power is on and the printer is ready.

Flashing blue - labels are not loaded properly or the label roll is empty.

Dimmed blue - printer is in power saving mode.

With a roll of labels in the printer, press and hold the form-feed button on the front of the

printer for five to ten seconds.

The printer begins printing vertical lines along the width of the printer. The test pattern

automatically changes every 3/4 inch (19 mm).

Once the self-test begins, release the form-feed button.

To stop the self-test, press and release the form-feed button.

Tear off any labels that have already fed

through the printer.

Press the platen release lever forward

and pull the jammed label out of the

platen mechanism.

Chapter 4

Getting Help

Press platen

release forward